The 3500/93 System Display is configured using 3500
Rack Configuration Software. The display can be mounted
in any of four ways:
1. Face Mounting – display installs directly over the
front panel of any full size 3500 rack using a
special hinged support. This permits access to
the rack’s buffered output connectors and userinterface buttons and switches without
disconnecting or disabling the display.
Note: For this mounting option only, the Display
Interface Module (DIM) must be installed in slot 15
(right-most slot) of the rack. The Face Mounting
option is not compatible with the 3500 Mini-rack.
2. 19-inch EIA Rack Mounting – display is mounted
on 19-inch EIA rails and located up to 100 feet
away from the 3500 System. (Up to 4000 feet
away from the 3500 System when using the