Manufacturer : Bently Nevada
Product : 330103-00-03-05-02-00
Product type : 3300 XL 8 mm Proximity Probes
Made in U.S.A
Ordering information
No thread length option: 00-0 mm
Case total length options: 03-30 mm
Total length options: 10-1.0 m (3.3 ft)
Connector and cable type options: 02 – Miniature coaxial ClickLoc connector, standard cable
Agency certification options: 05-CSA, ATEX, IECEx certification

Unthreaded Length Option : 00 = 00mm
Overall Case Length Option : 03 = 30mm
Total Length Option: 05 = 0.5 metre (1.6 feet)
Connector and Cable-Type Option : 02 = Miniature coaxial ClickLocTM connector, standard cable
Weight: 0.3Kg
Shipping Weight : 2 Kg

The 3300 XL 8 mm Proximity Transducer System consists of:
o One 3300 XL 8 mm probe,
o One 3300 XL extension cable1
, and
o One 3300 XL Proximitor Sensor2.
The system provides an output voltage that is directly
proportional to the distance between the probe tip and the
observed conductive surface and can measure both static
(position) and dynamic (vibration) values. The system’s
primary applications are vibration and position
measurements on fluid-film bearing machines, as well as
Keyphasor reference and speed measurements3.
The 3300 XL 8 mm system delivers the most advanced
performance in our eddy current proximity transducer
systems. The standard 3300 XL 8 mm 5-meter system also
fully complies with the American Petroleum Institute’s (API)
670 Standard for mechanical configuration, linear range,
accuracy, and temperature stability. All 3300 XL 8 mm
proximity transducer systems provide this level of
performance and support complete interchangeability of
probes, extension cables, and Proximitor sensors, eliminating
the need to match or bench calibrate individual components.

Proximitor
Sensor Input
Accepts one non-contacting
3300-series 5 mm, 3300 XL 8
mm Proximity Probe and
Extension Cable.
Power
Requires -17.5 Vdc to -26 Vdc
when installed with nonincendive circuit connected
per installation drawing 140979
at 12 mA maximum
consumption, -23 Vdc to -26
Vdc with barriers. Operation at
a more positive voltage than
-23.5 Vdc can result in reduced
linear range.
Supply
Sensitivity
Less than 2 mV change in
output voltage per volt change
in input voltage.
Output
Resistance 50 Ω