Model: IS200TBCIH1CBC
Input resistance (load)30 MΩ(DC), minimum value
Power off resistance 30 KQ (DC), typical
Common mode rejection -80 dB(DC-100Hz)
model
Common model range -12V to +12V peak
Pin to pin isolation 200KQ, typical

Product description
The IS200TBCIH1CBC is a device called a contact terminal board. This is a PCB created for the Mark VI series. The Mark VI series is one of several series that make up the Mark Series by General Electric or GE. These systems have been developed to control all operations of gas and steam turbines in industrial environments.

The IS200TBCIH1CBC is a long circuit board with a variety of different electronic components. Two (2) very large black pure terminals occupy the left half of the IS200TBCIH1BBC. These terminals have forty-eight (48) silver metal terminals. These terminals are identified by a series of numbers from one to forty-eight, with twenty-four (24) in each terminal block. To the right of the IS200TBCIH1CBC is a long string of circular capacitors. These capacitors are steady red. Twenty-five (25) capacitors are arranged next to these terminals. Located on the right edge of the IS200TBCIH1BBC are three jack connector ports, one in silver and one in black. To the right of each connector port is a very small integrated circuit labeled with the letter U. The other two (2) white connectors are located in the center of the top of the IS200TBCIH1CBC. Both connectors contain three (3) ports that can be used to connect other components to the IS200TBCIH1CBC. On the right side of the PCB center is a long row of tiny resistors. This line spans almost the entire length of IS200TBCIH1CBC.