Model: VMIVME-2534
Features:
32-bit high voltage output
A high voltage output
High current Absorber (600mA)
High breakdown voltage (min. 60V)
Output clamp diode
Overcurrent protection (1A) Thermal limiting protection
VMIVME-2534 Incandescent lamp or inductive load driver (no external heating or current-limiting resistance required)
32-bit high voltage input

Each set of eight inputs can be jump-selected to monitor contact closure, voltage sources, current absorption and differential signals
The open circuit provides logic zero or (jumper optional) logic one
Input filter option
User selectable input voltage width (1.25 to 60V)
P2VO connection (no front panel connector)
Built-in testing (offline and live support)
100% testing of all active components (including output drivers)
Front panel with faulty LED

Output organization :VMIVME-2534 Four ports, eight bits wide. Can be addressed to any address within a short supervised or short unprivileged I/0 map.
Output characteristics: The VMIVME-2534 High Current driver (600 mA filling current) output is designed to drive incandescent lamps and inductive loads without external current limitation or heating resistance. Due to the cold filament rush, it is recommended that only one lamp be driven by the output driver. However, if more than one bulb must be driven by one wire, the other driver can be connected in parallel. If one output must drive more than one bulb, the VMIVME-2131(current source/sink) or VM IVME-1130(current source only) are recommended.