Model: VMIVME-2510B
peculiarity
The VMIVME-2510B is a 64-bit TTL input/output board compatible with the VME bus. Its features include:
The direction of each 8-bit port can be programmed separately
64 mA absorption capacity (15 mA source)
Split board address decoding of control register and data register
Built-in test logic for fault detection and isolation
Failed LED
Compatible with VMIVME-9016 intelligent I/0 controller
High reliability DIN I/0 connector
8 bit, 16 bit, 32 bit transmission
· Optional open circuit output of collector electrode

Function description
The VMIVME-2510B is a member of the VMICMegamoduleTM family, which has general-purpose programming capabilities. The subsystem can be configured with consecutive I/0 addresses to save memory. These products (VMIVME-1110, VMIVME-2120, VMIVME-2130, and VMIVME-2510B) are designed with two sets of board address switches that provide efficient memory address mapping and I/0 addresses for the CSR. The CSR address switch can be set so that all CSRS between the various boards in the system can be mapped to a continuous memory location.
MegamoduleTM products are also designed to support 8-bit, 16-bit and 32-bit data transfers. Specific hardware has been designed in the VMIVME-2510B to support built-in testing capabilities. The VMIVME-2510B supports offline and online fault detection and isolation. The fault indicator on the front panel indicates whether there is a fault on the board. When powered on or reset, the LED lights up. After the board level diagnosis is successfully completed, the LED can be turned off.