Model: SCXI-1102C
Category: SCXI Voltage input module
32 channel, ±10 V, 10 kHz filter, voltage input module for SCXI – SCXI‑1102C is designed for signal conditioning of thermocouple, millivolt, volt and current signals. It has a cold-end compensation sensor for temperature measurement and multiple gain ranges based on a 10 kHz cutoff frequency filter. All channels Multiplexes a single channel that controls a DAQ device, thereby increasing the number of channels in a DAQ system.

SCXI voltage input modules, such as NI SCXI-1100 and NI SCXI-1120, are modular measurement system modules from National Instruments (NI).
These modules are used to convert external voltage signals into digital signals for data acquisition, analysis and control.

SCXI-1102C
Basic features:
Voltage input: The SCXI-1102C offers multiple voltage input channels for single-ended and differential measurement.
Range: Different range options are available, allowing the user to select the appropriate Settings according to the measurement needs.
Resolution and sampling rate: Resolution and sampling rate usually depend on the NI data acquisition hardware and Settings selected. The resolution determines the accuracy with which the analog-to-digital converter (ADC) converts a continuous signal to a digital signal, while the sampling rate determines the rate at which the module acquires data.
Specific model introduction:

The SCXI-1102C module has multiple voltage input channels and supports different range ranges.
Often used in conjunction with NI’s software platforms, such as LabVIEW, it provides a wealth of tools and libraries for data acquisition, analysis, and visualization.

This is an economical analog input module that supports signal conditioning and isolation for a variety of signal types such as thermocouples, current, voltage, millivolt signals.
It has 8 isolated input channels, each with a configurable low-pass filter and different gain stages.