You are here:

BNC2110 | Programmable gain and filter Settings

Model: SCXI-1125
Features:
Programmable gain and filter Settings
Programmable offset calibration
300 Vrms per channel working isolation
Signal input range: ±2.5 mV to ±300 V

Categories:
Tags:
Email:jllucky33@qq.com
phone:(86)17372046300

Product content

BNC2110 | Programmable gain and filter Settings

Model: BNC2110
Features:
Programmable gain and filter Settings
Programmable offset calibration
300 Vrms per channel working isolation
Signal input range: ±2.5 mV to ±300 V
The National Instruments BNC2110  is an 8-channel isolated analog input module that provides 300 Vrms of operational isolation and low-pass filtering per analog input channel. Each channel includes programmable gain and filter Settings. The modular architecture is ideal for amplifying and isolating millivolt, volt, 0 to 20 mA, 4 to 20 mA, and thermocouple signals. BNC2110 can multiplex up to eight channels into a single channel of a DAQ device. Additional modules can be added to increase the number of channels.
The NI BNC2110 includes calibration hardware that invalidates error sources. With programmable offset calibration, a software-programmable analog switch ground the input to each meter enhancer for offset error calibration. The locally available EEPROM stores the calibration constant for each channel of each input extension in the client signature area. The EEPROM also stores the arrangement of the factory calibration constant in permanent memory, which cannot be changed. The NI-DAQ driver software can verify the gain and offset error directly using the calibration constants. The device has an output range of ± 5.0V and weighs 22.6 ounces. It measures 7.4 x 6.8 x 1.2 inches.
In this model, each channel contains an automatic low-pass filter that the user can configure to either 4 Hz or 10 kHz. With BNC2110 , users can perform irregular scans, which means they can select only the channels from which they need to pick information, and then scan the channels in any order. Each channel is independently limited to an operating common-mode voltage of 300 Vrms between channels or between channels to ground. In addition, the BNC2110 is CE certified with dual insulation Class II operating isolation.

You may also like

Reviews (no reviews yet)

Reviews

There are no reviews yet.

Be the first to review “BNC2110 | Programmable gain and filter Settings”

Your email address will not be published. Required fields are marked *

Post comment