IC693DSM302-AE | Two-axis motion control module |HYDRAN M2 | SR489-P5-HI-A20

Model: IC693DSM302-AE

Category: Two-axis motion control module

Delivery method: SF Express/Federal

Remittance: Wire transfer/Western Union

Control power supply: nominal 25 VA, maximum 35 VA

Insulation voltage: 300 volts

Communication protocol: Modbus RTU or DNP 3.0

Data record storage: 2 to 16 events with 2048 to 256 data samples

Waveform capture sampling rate: 16 per cycle

Product description

The IC693DSM302-AE module is a two-axis motion control module that is highly integrated with logic solvers and

The communication function of the lC693 PLC offers two main control loop configurations: standard mode and Follower mode. The basic functions of the DSM302 are as follows:

The digital signal processor (DSP) provides ge Fannuc AC servo with vector control servo loop updates :250 ussec(torque), 1 mSec(speed), 2 mSec(position) block processing time at speeds below 5 milliseconds with feedforward and position error integrators, improving tracking accuracy for high resolution programming units

8.388.608… +8,388.607 User units

Location:

Speed:

1… 8,388,607 User units per second

Acceleration :1… 134.217.727 User unit/s/s

Ease of use

Simple yet powerful instruction set

The IC693DSM302-AE features single – or biaxial motion programs initiated by synchronous blocks

Program support for short motion programs (called program zeros) that can be created in MS-DOS

Programming software configuration function

Non-volatile (flash) memory for 10 programs and 40 subroutines

User Extended Programming unit (only in standard mode)

General-purpose programming that uses command parameters as operands for acceleration, speed, movement, and residence

Command to configure the MSDOS configuration software