MTL831B | Programmable logic | 8724-CA-PS

Product model: MTL831B
Product Category: Programmable logic
Finish: New/not new
Delivery time: from stock
Guarantee: One year
Express: SF Express/Debon

The MIL831B is an FPGA device that integrates programmable logic and digital signal processing (DSP) capabilities with high-speed parallel processing capabilities for a variety of digital signal processing applications. It has the following characteristics:
High-speed parallel processing capability: The MTL831B uses a parallel architecture to process multiple data streams simultaneously, making it suitable for digital signal processing applications that require high-speed processing.
Programmable logic and DSP functions: The MTL831B integrates programmable logic and digital signal processing functions, which can flexibly implement various digital signal processing algorithms and logic control functions.
High performance memory: The MTL831B has a built-in high performance memory, which can store a large amount of data and processing results, and is suitable for applications requiring large amounts of data storage and processing.
High-speed interface: The MTL831B has a high-speed interface for high-speed data transmission and control with other devices, and is suitable for applications that require high-speed data transmission and control.
Overall, the MTL831B is a high-performance, flexible, high-speed FPGA device suitable for a variety of digital signal processing applications, such as communications, image processing, audio processing, etc
:1 MTL838B-MBF(receiver) with 1 or 2 MTL831B(transmitter) with 1 or 2 MTL3052(isolation gate)

Multiplexing system.
MTL’s multiplexing system reduces the cost of laying hazardous area cables by sending and receiving input and output signals from single or several pairs of lines
MTL multiplexer selection
The MTL800 series of intrinsic multiplex converter system transmits the multiplex signal from the dangerous area to the safe area through only two wires. The MTL831B multiplex transmitter is usually installed in hazardous situations where it is associated with field sensing
The device or switch is connected to transmit these input signal states to the safe zone through a single pair of data links that support communication between the danger zone and the safe zone, using MTL’s own communication protocol, when
However, it also provides power to the transmitter and does not require on-site power supply.
A typical use of the MTL831B is in an ENC83 enclosure close to the field instrument. MTL831B quasi-input transmitter
Monitor up to 16 thermocouples or voltages (up to plus or minus 60mV) or 15 2,3,4 wire heating resistors in hazardous situations.
1. Intrinsic safety applies to Zone 0
2 Communication and power supply from the – to the data link 3. Power supply from the same data link
4. Thermocouples and thermal resistors can be used on the same transmitter – Two MTL831B multiplexers can share the same single pair of data links to the safety zone – an isolator or receiver or a combination of them, provided
Up to 32 multiplexing inputs