DS200TCRAG1ACC | DS215DMCBG1AZZ03A | Relay output board

Function Description 】

DS200TCRAG1ACC technical specification

Manufacturer ge General Electric

Series mark V
Model: DS200TCRAG1ACC

Product Type: Relay output board

Product description

GE relay output board DS200TCRAG1ACC is equipped with 30 plug-in relays. It also has four 34-pin connectors and four 12-pin connectors. The ids assigned to the 34-pin connector are JOR, JOS, JOT, and JO. The ids assigned to 12-pin connectors are JS3, JS4, JS5, and JS6. The GE relay output board DS200TCRAG1ACC has multiple connectors. Therefore, when replacing the board, follow the corresponding operation guide to quickly connect the cable to the corresponding connector. Before starting the replacement, make sure you know the location of the emergency shut-off device for the current supplied to the drive. And, you must understand how to operate the shutdown and verify that it is in good working order. Those familiar with the installation of the drive will have detailed information about the power supply and emergency cut-off. The next step is to verify that the floor in the area around the drive is clean and free of moisture or standing water. Clean the oil from the floor with detergent. Also remove all ungrounded power cables for both feet, otherwise there is a risk of electric shock.

It is best practice to inform operators and managers of other equipment in the work area of work plans so that they can plan for and around work disruptions. Choose a clear, flat, sturdy workspace near the drive and place the box containing the circuit board on it.

DS200TCRAG1ACC Frequently Asked Questions

What does DS200TCRAG1ACC work with?

The DS200TCRAG1ACC runs with a digital I/O core of 3 gas turbine control processors, or the DS200TCRAG1ACC runs with a general-purpose data processor. These cores used by the DS200TCRAG1ACC are < QD > or < CD >.

How many relays are there on DS200TCRAG1ACC?

There are 30 plug-in relays on DS200TCRAG1ACC.

What is the contact rating of the relay on DS200TCRAG1ACC?

Each relay on the DS200TCRAG1ACC has a 0.5 amp contact rating.