3HAC043569-004 | Motor with pinion type C | 3HAC025466-001 | 3HAC5497-1

Model: 3HAC043569-004

Category: Motors with pinion type C

Finish: New/not new

Express: SF Express/Debon

Warranty: One year

Delivery time: from stock

Module and number of teeth: 3HAC043569-004 The module and number of teeth of the pinion determine its transmission efficiency, accuracy and ability to withstand loads. The smaller the modulus, the more teeth, the greater the pressure Angle, and the corresponding increase in noise and wear. The greater the modulus, the fewer the number of teeth, and the greater the torque and load that can be borne.

Application: 3HAC043569-004 pinion is widely used in many industries, such as machinery, electronics, automotive and so on. In machinery manufacturing, pinion is often used in reducer, transmission box and other mechanical transmission; In the electronics industry, pinion is often used in gearbox deceleration and transmission; In the automotive industry, pinion gears are used for key components such as engines and steering systems.

Next, about the motor:

A motor is a device that converts electrical energy into mechanical energy. Depending on the application and requirements, the type and specifications of the motor will also vary. For example, AC motor, DC motor, servo motor and so on. Motors are often used in combination with gear systems to achieve different speeds, torques and transmission ratios.

Combined with the above information, we can summarize the “motor with pinion type C” as follows:

Structure: The motor may contain a C-gear or gear system connected to the output shaft of the motor. The specific parameters of the type C gear (such as modulus, number of teeth, etc.) may be customized according to the application needs of the motor.

Function: Through the motor drive C gear, to achieve power transmission and speed conversion. Type C gears may be used to achieve specific transmission ratios to meet specific application requirements.

Applications: Pinion type C motors may be widely used in applications where precise control of speed, torque and transmission ratio is required, such as mechanical automation, precision manufacturing, electronic equipment and other fields.