Model: DS200ADGIH1AAA
Category: auxiliary interface board
Finish: New, not new
Warranty; A year
Stock: Yes
Brand: GE

The GE auxiliary interface board DS200ADGIH1AAA has a 40-pin connector, a 60-pin jumper, and a 6-pin connector. The GE auxiliary interface board DS200ADGIHIAAA is also equipped with multiple test points. The board is eight inches wide. The DS200ADGIH1AAA is 6 inches long and is designed to be installed in the inverter’s cabinet. It has four screws, which are aligned with a position on the board frame for mounting with screws.

A test point provides a method for testing a circuit on a board. However, only qualified maintenance personnel can test the motherboard. Service personnel must have test equipment calibrated and designed for the task. The control device must be set up correctly and the probe must be designed for use with the tester. Place the board on a flat surface and place a protective bag under the board.

In addition, because of the risk of static electricity, maintenance personnel must always wear a distorted wristband. When the wristband is properly installed, one end of the wristband is tied around your wrist and the other end is clipped to the metal leg of your workbench or desk. It can also be attached to other metal structures. Static electricity is attracted to the metal floor and leaves the circuit board or your body.

Another appropriate step to reduce the buildup of static electricity is to avoid moving the board around while holding it in your hand. The friction of walking causes electrostatic accumulation. This is especially true in cool, dry weather conditions. If you don’t have a wristband, you can also touch the static bag containing the surfboard to a metal structure, such as a chair or metal table leg.

The GE DS200ADGIH1AAA analog input/digital output module may support communication interfaces such as Ethernet, serial communication, etc., for data transmission and remote monitoring. GE DS200ADGIH1AAA Product Details:

Multifunctional modules: The GE DS200ADGIH1AAA analog input/Digital output module combines analog input and digital output functions and can be used in a variety of control and monitoring applications. Analog input channels: There are usually multiple analog input channels used to connect sensors or measuring devices to monitor real-time analog signals, such as temperature, pressure, etc.

Digital output channels :GE DS200ADGIH1AAA analog input/digital output modules typically have multiple digital output channels for controlling external actuators or devices such as electric valves, motors, etc. High precision :GE DS200ADGIH1AAA analog input/digital output module usually has high precision analog input and stable digital output capability, suitable for precision control and monitoring.

Communication interface: May support communication interface, such as Ethernet, serial communication, etc., to achieve data transmission and remote monitoring.

Programming: The module can be programmed and configured using GE PLC programming software to implement the required control logic.

Industrial standards :GE is a leading supplier of industrial automation products that meet industry standards for high reliability and stability.