DS200DMCBG1AED | DS200DCFBG1BNC | processor board
Product Information:
Product model: DS200DMCBG1AED
Brand: GE
Country of Origin: USA
Product status: In stock
Warranty: One year
Categories: GE
Tags: DS200DMCBG1AED
Email:jllucky33@qq.com
phone:(86)17372046300
Product content
Product Information:
Product model: DS200DMCBG1AED
Brand: GE
Country of Origin: USA
Product status: In stock
Warranty: One year
The GE DOS DUP processor board DS200DMCBG1AED contains three 26-pin connectors, one 40-pin connector, and 19 jumpers. The board also has 2 leds. The GE DOS DUP processor board DS200DMCBG1AED also has two fuses to provide overvoltage protection. If the power supply of the circuit board occurs an instantaneous surge, the components in the fuse are blown, and the circuit board completely stops working, or stops working in the circuit protected by the fuse. If the fuse is rated incorrectly, the components on the circuit board will be damaged. Therefore, if you replace a fuse, only use a replacement with the same rating. Information about fuses is provided in the information on the original circuit board that came with the factory. Alternatively, you may find a rating printed on the fuse.
Checking the condition of the fuse is a quick initial step to troubleshooting the board, as it only requires a visual inspection. If you suspect that the performance of the board is not up to expectations, you can open the circuit board cabinet door and find the fuse on the board. If one or both fuses blow, disconnect all power to the drive, remove the circuit board, and replace the fuse. Restart the drive and determine if the motherboard is up and running again. If the problem persists, the next step is to look at the 2 leds on the board. Leds are identified on the board as CR2 and CR12 and are red when they light up.
The DS200DMCBG1AED is a General Electric power board component.
The DS200DMCBG1AED contains three 26-pin connectors, a 40-pin connector, and 19 jumpers, as well as two indicator lights with two fuses to provide overvoltage protection. If there is an instantaneous surge of power to the board, the components in the fuse will be blown, and the board will stop working completely.
GE | DS200RTBAG3AFB |
GE | DS200RTBAG3AEB |
GE | DS200RTBAG3AEB |
GE | DS200RTBAG2AFB |
GE | DS200PCCAG1ABB |
GE | DS200NATOG2A |
GE | DS200LPPAG1AAA |
GE | DS200LDCCH1ANA |
GE | DS200LDCCH1ALA |
GE | DS200LDCCH1ALA |
GE | DS200LDCCH1AGA |
GE | DS200KLDCG1AAA |
GE | DS200KLDBG1ABC |
GE | DS200ITXDG1ABA |
GE | DS200IQXSG1AAA |
GE | DS200IIBDG1A |
GE | DS200IIBDG1A |
GE | DS200FSAAG2ABA |
GE | DS200FGPAG1A |
GE | DS200FGPAG1A |
GE | DS200DSPCH1ADA |
GE | DS200DPCBG1AAA |
GE | DS200DMCBG1AKG |
GE | DS200DMCBG1AKG |
GE | DS200DMCBG1AED |
Reviews
There are no reviews yet.