Baseboard options: Controller base and Ethernet expansion base

Internal power supply, 3.3VDC: 600 mA

Internal power supply, 5VDC :240 MA

How to exchange support: Yes

Backplane support; Supports PCI and high-speed serial

Dimensions (H x W x D) :141.4 x 457.2 x 147.3 mm (5.5 x 18 x 5.8 inches)

Install the required minimum clearance on all sides of the 102 mm (4 in) backplane

Brand :GE Fanuc

The IC695CHS012 is a PACSystem RX3i backplane. The backplane has 12 slots and supports high-speed peripheral component interconnection (PCI) and serial bus connectivity. The backplane is a necessary component because it provides the housing and connections for the RX3i module. It also hosts the communication bus, where internal communication occurs between modules.

The power consumption of the IC695CHS012 is 600 mA@3.3VDC and 240 mA@5VDC. It has physical dimensions of 18.01 x 5.57 x 5.80 (457.5 x 141.5 x 147.32) and supports horizontal installation. It can be installed in a housing offering IP20 / NEMA/UL Type 1 protection. To cool naturally and promote adequate air circulation, the backplane must have a gap of 102 mm or 4 inches on all sides of the hardware. For ATEX Zone 2 hazardous zone requirements, the IC695CHS012 must be installed in an IP54 or higher housing that is mechanically strong enough to withstand 3.5 joules of impact energy.