You are here:

IC697PWR711L | 90-30 PLC controller Power module

Categories:
Tags:
Email:jllucky33@qq.com
phone:(86)17372046300

Product content

Model: IC697PWR711L

Series :90-30 PLC controller

Retention time: Minimum 21 ms

Overcurrent limit :+5 VDC output: 26 amps, maximum +12 VDC output: 4 amps, maximum -12 VDC output: 2 amps, maximum

Overvoltage limit: +5 VDC Output: 5.7 to 6.7 volts

Input half-cycle peak surge 55 amps (typical), 77 amps (maximum)

Input frequency range: 47-63 Hz

Input voltage range, AC 90-132 V AC / 180-264 V AC

 

Output voltage :+5 VDC: 4.90 to 5.25 volts (nominal 5.07 volts) +12 VDC: 11.75 to 12.6 volts’ -12 VDC: -12.6 to -11.75 volts

Nooooo. Output quantity three (3)

The GE Fanuc Automation IC697PWR711 power module includes electronic short circuit protection and power factor correction when operating at AC voltage. If the GE Fanuc Automation IC697PWR711 power module is to operate continuously in an environment of high temperature and low line voltage, its specifications must be reduced to ensure safe operation. It only works when the temperature is below 60 degrees Celsius. The GE Fanuc Automation IC697PWR711 power module is installed in the left slot of the GE IC697 rack or any VME integrator rack and is a plug-in module type. The module has an input half-period peak surge current of 3 amps.

 

GE IC697CPX928
GE IC697CPM790-GD
GE IC697CMM742-LL
GE IC697PWR711N/GE
GE IC697CMM742
GE IC697ALG320D
GE IC697PWR710
GE IC697MDL240
GE IC697MDL340
GE IC697CMM742-CA
GE IC697BEM731
GE IC697ALG321
GE IC697BEM742

You may also like

Reviews (no reviews yet)

Reviews

There are no reviews yet.

Be the first to review “IC697PWR711L | 90-30 PLC controller Power module”

Your email address will not be published. Required fields are marked *

Post comment