Model: IS200TREGH1BDB
Category: Printed circuit board
Quality: New, not new
Warranty: 365 days
Stock: Yes
Brand: GE

Product description

The IS200TREGH1BDB Trip Emergency Termination Board is a printed circuit board or PCB for the Mark VI series, created by General Electric or GE. The Mark VI is the latest in the GE Mark series, designed for the operation and automation of steam and gas turbines.

The components on the IS200TREGH1BDB trip emergency termination board consist of a series of square transformers that are covered by clear plastic and silver wires and contain information about the components, such as part number and voltage. Twelve of these transformers are located on two vertical lines, each of which has six transformers. In addition, there are two large black terminals that occupy the space on the left edge of the board, a total of 48 terminals, evenly divided between the two terminals. The board also contains a number of components called metal oxide varistors or MOV, which are round and solid red and are placed on the edge of the board. Finally, three white jumper ports are placed on the top edge of the board, for a total of seventeen ports between these ports.

Overall, the IS200TREGH1BDB trip Emergency stop board is an important component used in steam turbines and gas turbines to monitor and control the operation of the power system and take emergency measures if necessary to protect equipment and personnel.

The rectangular IS200TREGH1BDB printed circuit board has two (2) long solid black terminal blocks on its left border. Inside each post are 24 silver metal terminals. A series of approximately ten (10) round red elements, called MOVs or metal oxide varistors, are arranged on the right side of these terminal blocks. Most of the space in the middle of the IS200TREGH1BDB is occupied by collectors or large relays or contactors. These relays/contactors are arranged into two (2) long wires of each (6) element. Components are placed in pairs, parallel to each other from top to bottom. Along the right border of the IS200TREGH1BDB is a set of three (3) jack connector ports. Each port contains a collection of small pin ports. Four large capacitors of rectangular shape can be found in two (2) different regions to the right of the IS200TREGH1BDB. These four (4) components are pure yellow. Two (2) are paired near the top right corner and the other two (2) are paired in the bottom right corner.