IS200TSVCH1AJE | IS200TREGH1BDB | Printed circuit board
Model: IS200TSVCH1AJE
Category: Printed circuit board
Quality: New, not new
Warranty: 365 days
Stock: Yes
Brand: GE
Categories: GE
Tags: IS200TSVCH1AJE
Email:jllucky33@qq.com
phone:(86)17372046300
Product content
Model: IS200TSVCH1AJE
Category: Printed circuit board
Quality: New, not new
Warranty: 365 days
Stock: Yes
Brand: GE
Product parameters:
Input voltage range: 12-48VDC
Output voltage range: 5VDC
Output current: Max. 10A
Efficiency: greater than 90%
Dimensions: 170mm x 105mm x 32mm
Weight: About 120g
Operating temperature: -20°C to +50°C
Storage temperature: -40°C to +70°C
Ambient humidity: 5% to 95% relative humidity (no condensation)
CPU: 32-bit RISC processor
【 Function Description 】
Ge’s IS200TSVCH1AJE is a Mark VI printed circuit board designed for servo terminal boards. This is one of several turbine-specific terminal boards offered by GE as part of the Mark VI or Mark VIe Speedtronic system. These I/O modules provide a direct interface to field devices. This helps reduce or eliminate many of the tools that were needed in the past. This reduction greatly simplifies long-term maintenance and removes points of failure from the system. It can also provide direct diagnostics for direct monitoring of field equipment. The board usually works with the PSVOH1A package.
The IS200TSVCH1AJE is a movable barrier type terminal block. The board has 2 coil outputs, 2 channels, and 2 pulse rate inputs. The board provides 8 LVDTS.
The IS200TSVCH1AJE is filled with two rows of vertical connectors along the top of the board. There are additional connectors in the lower right corner of the board near a small terminal connector. The other two vertical connectors are located on the left side of the board. In addition, the board has two terminal bands along the bottom of the board.
The IS200TSVCH1AJE has a GE identifier and board ID. In addition, the board comes with a reference name, so users can easily identify individual components.
Reviews
There are no reviews yet.