IS200VTCCH1CBB | IS200TPROS1CBB | Terminal board
Model: IS200VTCCH1CBB
Category: Terminal board
Quality: New, not new
Warranty: 365 days
Stock: Yes
Brand: GE
Categories: GE
Tags: IS200VTCCH1CBB
Email:jllucky33@qq.com
phone:(86)17372046300
Product content
Model: IS200VTCCH1CBB
Category: Terminal board
Quality: New, not new
Warranty: 365 days
Stock: Yes
Brand: GE
Product parameters:
Input voltage range: 12-48VDC
Output voltage range: 5VDC
Output current: Max. 10A
Efficiency: greater than 90%
Dimensions: 170mm x 105mm x 32mm
Weight: About 120g
Operating temperature: -20°C to +50°C
Storage temperature: -40°C to +70°C
Ambient humidity: 5% to 95% relative humidity (no condensation)
CPU: 32-bit RISC processor
【 Function Description 】
IS200VTCCH1CBB technical specification
Series Logo VI
Manufacturer of General Electric Motors and Industrial Systems
Instruction manual geh-642
Thermocouple input terminal board
Function abbreviation/abbreviation vtcc
Thermocouples support e, J, K, S, T type
Product description
Model IS200VTCCH1CBB is one of the Mark VI boards produced by General Electric. The model is specified as a thermocouple input and can accept up to 24 thermocouple inputs. The input for this model can be connected to the DTTC or TBTC terminal board. The TBTC terminal board is a matching terminal board, and the DTTC terminal board is a DIN Euro code terminal board. According to the TBTC model used with the VTCC model, it can be used for two different groups. The TBTCH1C model allows simplex control, while the TBTCH1B model allows three-mode redundancy (TMR) control. The vocational training Center also has two models; The IS200VTCCH1CBB model is part of the first group, which shows that the model can be used for gas turbine control applications. Regardless of which group VTCC model is used, the same terminal board will be used.
While the IS200VTCCH1CBB model accepts thermocouple inputs, the VTCCH1 model supports input types E, J, K, S, and T thermocouples and mV inputs. VTCC models allow a mV span of -8 mV to + 45mv. The thermocouple inputs used in this model can be grounded or ungrounded and can be located up to 984 feet from the relevant turbine control cabinet. The terminal board has two cold contacts and a high-frequency noise suppression device.
When the IS200VTCCH1CBB model is operating in a TMR system, if a signal on the device deviates from the median/voting value beyond a predetermined limit, the signal will be identified and cause a fault. For more information on VTCC model fault indications and available diagnostic tests, see GE Manual GEH-6421.
Reviews
There are no reviews yet.