IS200AEPAH1BKE IS215WEPAH2BB | Printed circuit board
Model: IS200AEPAH1BKE IS215WEPAH2BB
Category: Printed circuit board
Quality: New, not new
Warranty: 365 days
Stock: available
Brand: GE
Categories: GE
Email:jllucky33@qq.com
phone:(86)17372046300
Product content
Model: IS200AEPAH1BKE IS215WEPAH2BB
Category: Printed circuit board
Quality: New, not new
Warranty: 365 days
Stock: available
Brand: GE
The rated current is 2A
Wide operating voltage range from 24V DC to 240V AC/DC
Fast response speed, ≤ 8ms
Low power consumption, ≤ 3W
Has a variety of diagnostic functions
Powerful function
SIL1/PLc safety rating is supported
Supports local and remote reset
Support test function
Easy to use
About IS200AEPAH1BKE
As a member of GE’s Mark VI Speedtronic family of printed components, IS200AEPAH1BKE printed circuit boards are often referred to in the industry by their unique functional acronym; AEPA. This particular model of AEPA board is considered a revised or updated version because it has a functional revision 1 value of B, a functional revision 2 value of K, and a graphic revision value of E. Consider each revision carefully before deciding to buy this IS200 model, as they can greatly affect compatibility or installation specifications.
Hardware tips and specifications
IS200AEPAH1BKE IS215WEPAH2BB model is a printed circuit board. When the AEPA board is built, it is built with an optional auxiliary board. The optional auxiliary board will be inserted with screws into the bracket on the AEPA. If the auxiliary board is connected to the main module, there are two connectors in the upper left corner. The two connectors are male connectors. There are many integrated circuits, including but not limited to a three-pin female connector and two female telephone plugs.
AEPA modules can be used with triple modular or simplex redundancy types. When used with a triple modular redundant architecture, the IS200AEPAH1BKE PCB requires the use of three separate and independent control modules, IONet, and power supplies. The TMR architecture also allows for a single point of failure within an electronic device, and modules or defective cards can be repaired while the process is running.
module
Some components specific to the IS200AEPAH1BKE PCB model include:
12 relays
Various metal oxide varistors, the board corner has a main metal oxide varistor
There are 19 white female vertical pin connectors ranging from 2 to 18 pin connectors. These connectors are located on the edge of the AEPA board.
Form-preserving protective PCB coating
Reviews
There are no reviews yet.