IS200DSPXH1DBC IS200DSPXH1DBC | Printed circuit board components
Model: IS200DSPXH1DBC IS200DSPXH1DBC
Category: Printed circuit board components
Quality: New, not new
Warranty: 365 days
Stock: available
Brand: GE
Categories: GE
Email:jllucky33@qq.com
phone:(86)17372046300
Product content
Model: IS200DSPXH1DBC IS200DSPXH1DBC
Category: Printed circuit board components
Quality: New, not new
Warranty: 365 days
Stock: available
Brand: GE
SIL1/PLc safety rating is supported
Supports local and remote reset
Support test function
Easy to use
Processor TMS320C6713B
The main frequency is 1GHz
Memory 128MB DDR2
External storage 256MB NAND Flash
Interface Ethernet, RS232, RS485, CAN bus
Operating temperature -40℃ to +85℃
Humidity 5% to 95%RH, non-condensing
Dimensions 100mm x 60mm x 22mm
About IS200DSPXH1DBD
IS200DSPXH1DBC IS200DSPXH1DBC is a printed circuit board component manufactured and distributed by GE, originally as part of its Mark VI Speedtronic family. The Mark VI was created as a control system for gas and steam industrial turbine systems and is commonly used in energy systems. The IS200DSPXH1DBD is specifically designed for use with Innovation series drives and EX2100 exciters.
IS200DSPXH1DBC IS200DSPXH1DBC is a small rectangular board with an attached front panel. It serves as a digital signal processor control board and is designed to have a digital signal processor connected to an ASIC (application-specific integrated circuit) that performs custom logic functions. The board is loaded with onboard firmware stored in its flash memory.
The board has multiple input/output connectors, two of which are located in the front panel to which it is connected. The panel also has two embedded LED indicators (one green and one red) that help inform the processor of alerts. In addition, the board has right-angle backplane connectors with multiple functions. These include data buses, address buses, control output signals, keyboard interfaces, tool interfaces, and VCO inputs.
IS200DSPXH1DBC The IS200DSPXH1DBC is an electrostatic sensitive board. It is always recommended to use ground strips when handling circuit boards or circuit board components. To prevent damage to the circuit board and prevent possible electric shock, remove or replace the circuit board only when the rack is powered off. The board can only be installed in the correct rack position by qualified personnel. The correct installer can be found in the GE manual or data sheet originally provided with the IS200DSPXH1DBD.
GE | IS200EPMCH1 |
GE | IS200EPSMG1AEC |
GE | IS200EPSMG1AED |
GE | IS200ERDDH1ABA |
GE | IS200ERIOH1AAA |
GE | IS200EROCH1ABB |
GE | IS200EXHSG3AEC |
GE | IS200EXHSG3REC |
GE | IS200HSLAH2ADE |
GE | IS200ISBBG2AAB |
GE | IS200JPDDG1AAA |
GE | IS200PMCIH1AAA6BA00 |
GE | IS200PMCIH1ABA |
GE | IS200SAMBH1ABA |
Reviews
There are no reviews yet.