Product description

Brand: GE

Model: IS200TDBTH6ACD

Product name: Gas turbine control system module

Product width: 53 mm

Product height: 125 mm

Product net depth/length: 260 mm

The l5.20TDBTH6A is a device called a discrete simplex board. This is a form of printed circuit board or PCB manufactured by General Electric or GE. The IS200TDBTH6A is a component of GE’s Mark VI series for steam and gas turbine control. The series is one of several that make up the Mark series. These systems are used to control turbine systems in a wide range of industries worldwide.

The S200TDBTH6A prominently features a collection of 12 large black potentiometers, which are also called variable resistors. The potentiometers are arranged in three (3) horizontal rows of four components each. A rectangular gray element is placed on either side of the potentiometer. The bottom half of the IS20TDBTH6A is occupied by several rows of very small components. Two (2) rows of long round red elements, called MOV or metal oxide varistors, are arranged on the left side of the lS20TDBTH6A. At the very bottom of the lS20OTDBTH6A near the center is a small white connector with three (3) ports. This connection can be used to connect other devices to [S200TDBTH6A,

A few

Small ics can be placed in the top half of [S200TDBTH6A]. Some of them are aligned horizontally in the center, others are aligned vertically in the upper right corner. There is one (1) small yellow capacitor in the center of the IS20OTDBTH6A of the IC. Two (2) small yellow resistors are located at the bottom of the IS200TDBTH6A with one (1) black stripe in the middle.

GE IS200TDBTH6ACD Gas Turbine Control System Module Product Details:

The GE IS200TDBTH6ACD is a gas turbine control system module from General Electric (GE). It is part of the GE D200 series gas turbine control system for monitoring and controlling the operation of gas turbines.

The main functions and features of this gas turbine control system module may include:

Gas turbine control: The IS200TDBTH6ACD module is used to monitor various parameters of the gas turbine, such as temperature, pressure, speed, etc., and control the operating state of the gas turbine according to the set logic and strategy.

Data acquisition: The module can collect the data provided by sensors and equipment for monitoring the operating status of the gas turbine, and transmit the data to the upper system for processing and analysis.

Communication interface: The IS200TDBTH6ACD may be equipped with a communication interface for data exchange and communication with other control systems and devices.