Model: IS220PDIOH1A

Category: I/O packet module

Finish: new, not new,

Stock: Yes

Size: 17.71 × 13.77 × 7.87 cm

Operating temperature: -30 to 65 degrees Celsius

Series: Mark VIe

IS220PDIOH1A is an I/O package module for Mark VIe Speedtronic systems. Mark VIe was one of the late systems released by General Electric under the name Speedtronic. Speedtronic systems have been used for industrial turbine control since the release of the Mark I by General Electric in the late 1960s.

The IS220PDIOH1A has two Ethernet ports and its own native processor. It can be used with IS200TDBSH2A and IS200TDBTH2A terminal boards. These I/O packet/terminal board combinations have been approved for use in hazardous locations.

The minimum rated voltage of the IS220P DioH1A is 27.4 VDC. Its rating is 28.0 VDC. The device and its associated terminal plates have specific field wiring connection instructions that must be followed, including wire size and screw torque. This information can be found in the GE manuals associated with this device, such as the GEH-6725.

The front panel of the IS220PDIOH1A includes LED indicators for the two Ethernet ports, the device’s power supply, and an “attn” LED. Additional leds are associated with relay connections.

trait

High reliability: IS220PDIOH1A adopts redundancy design to ensure reliable operation of the system.

High precision: The board’s analog input and analog output have high precision to ensure accurate data acquisition and transmission.

High resolution: The board’s analog input and analog output have high resolution to ensure careful processing of data.

effect

The main role of IS220PDIOH1A is to provide analog I/O interface, connect analog signal equipment, and data acquisition and control. The board can convert analog signals into digital signals and transmit them to the control system for processing. According to the processing results, the control system can generate analog signals and send them to the analog equipment, so as to realize the control of the equipment.

use

IS220PDIOH1A is widely used in gas and steam turbine power plants for connecting analog signal equipment, and for data acquisition and control.