Product model :DS200SDCCG1AGD

Brand :GE

Country of Origin: USA

Product Status: Spot warranty: One year

The GE Drive control board DS200SDCCG1AGD is one of the main controllers used in the Mark V series drives. The GE drive control board DS200SDCCG1AGD is equipped with three microprocessors and RAM, which can be accessed by multiple microprocessors simultaneously. The 10 leds on the GE drive control board DS200SDCCG1AGD are used to display the fault code in the event of an error that triggers the fault. Ten leds are lined up and display error codes together. If no errors are encountered and the board is functioning properly, the leds will light up in order from left to right, two leds at a time.

To view the LED on the DS200SDCCG1AGD, you can open the board door, locate the board, visually inspect the LED and understand the condition of the board. However, you must be careful when opening the board door because of the high voltage present in the board and all components. Do not touch anything in the cabinet while the driver is powered on. Also, when the door is open, do not let anything fall into the cabinet, and close the door after the inspection is completed.

When the motherboard is first started, configuration parameters must be set to define how the motherboard handles information and controls the drive. There are several software tools available for editing parameters. These tools are available on your laptop. If you want to configure multiple devices at the same time, you can create a configuration and download the same configuration to multiple boards.

The DS200SDCCG1AGD is a Mark V series drive control card developed by General Electric Company.

The DS200SDCCG1AGD is the drive’s master controller, equipped with three microprocessors and RAM that can be accessed by multiple microprocessors simultaneously. If an error occurs, 10 leds on the DS200SDCCG1AGD are used to indicate the fault code. Ten leds are lined up, and when they are all lit, the fault code is displayed. If no problem is detected and the board is running smoothly, the LED goes off.

The GE Drive control board DS200SDCCG1AGD is one of the main controllers used in the Mark V series drives. The GE drive control board DS200SDCCG1AGD is equipped with three microprocessors and RAM, which can be accessed by multiple microprocessors simultaneously. The 10 leds on the GE drive control board DS200SDCCG1AGD are used to display the fault code in the event of an error that triggers the fault. Ten leds are lined up and display error codes together. If no errors are encountered and the board is functioning properly, the leds will light up in order from left to right, two leds at a time.

To view the LED on the DS200SDCCG1AGD, you can open the board door, locate the board, visually inspect the LED and understand the condition of the board. However, you must be careful when opening the board door because of the high voltage present in the board and all components. Do not touch anything in the cabinet while the driver is powered on. Also, when the door is open, do not let anything fall into the cabinet, and close the door after the inspection is completed.

When the motherboard is first started, configuration parameters must be set to define how the motherboard handles information and controls the drive. There are several software tools available for editing parameters. These tools are available on your laptop. If you want to configure multiple devices at the same time, you can create a configuration and download the same configuration to multiple boards.