The ABB PFEA113-65 3BSE050092R65 sensor has been found in many lines today and is widely used, especially in the field of industrial production measurement. The advantage of the tension sensor is that it is simple to install and makes the household

Moreover, it is suitable for hanging scales, weighing machines, modified scales and electronic force measuring systems. Ring tension sensor plate because of the same name and more suitable for a large range, bad working ring competition, good frequency response, many with dry building materials, cement, chemical, lifting, lifting and so on.

In addition, tension sensors are also used in the paper industry, pharmaceutical, chemical, food, steel mills, foil production plants, cable laying and sawmills and other machines, which require batch processing

The use of high quality hydraulic components and instruments.

A typical application of the ABB PFEA113-65 3BSE050092R65 tension sensor in the pharmaceutical field is to weigh the stirred container handling the corresponding prescription during processing in the factory. And in the printing industry, tension sensing

According to the collection of paper tension signal to the controller, and the controller according to the signal to adjust the unwinding and winding speed to achieve the balance of tension, and save the cost of waste and increase the output. In the printing press, it is necessary to detect the printing register, the amount of ink and water, the paper failure and other tests. And it uses the displacement type. Tension sensor installation:

The installation of the tension sensor is divided into two types, the first is to use the bearing seat fixed with a bolt hole to fix the bearing seat on the base. The other is to use the optional plate fixed bearing

When installing the method, it is important to pay attention to the causes of inaccurate tension measurement, when the tension sensing device is connected to the signal line, the switching quantity and the output terminal are weak and pure

Try to stay away from strong wires, so as not to interfere with electromagnetic signals on tension detection. In practical application, the output sensitivity, temperature compensation range, zero temperature shadow direction, rated load, limit conformity and other factors are also the reasons that affect the inaccurate tension measurement. Precautions for use:

1. The screws for installing the tension detector and bearing seat should not be too long, which will cause the reed of the tension detector to fail to work properly and no tension can be detected.

2. When using side fixing, the fixing screws should not be too long, otherwise it will cause damage to the measuring mechanism in the tension detector.

3. The tension detector should not be strongly impacted or harmed at any time, otherwise it will cause damage to the tension detector.