IS200EPSMG2A Technical specifications
Alphanumeric directory number IS200EPSMG2A
Category; Driver power module
Board type power supply board
Contact Wetting Supply 70 volts direct current
VDC power supplies 5, 15, and 24
Weighs less than 2 pounds
Feature revision 1 One

The IS200EPSMG2A is a power module paired with the EPDM module, which will provide 125 VDC. When connected to an external module, 24 VDC power is sent to the EDCF, EDEX, and EGDM modules. The power supply associated with the M1, M2 and C controllers is located and installed under the control rack in one of the control cabinets. The IS200EPSM for this release is 2A. This means that this model is also not backward compatible. When powering EXTB and ECTB, it will be an isolated 70 VDC, with VDC used for contact wetting. Three self-contained power supplies are used to power the C, M1 and M2 controllers. When powered on, the power supply of the EPDM model connected to the IS200EPSMG2A will be converted to the power supply most suitable for use with the module.

Product Description:
The IS200EPSMG2AEC digital input module is an input signal acquisition device for industrial automation and control systems. It has the following main features and functions:
1, the number of input channels: The IS200EPSMG2AEC module usually has multiple digital input channels for receiving external devices or sensors
The digital signal. The number of channels can vary depending on the model and configuration. 2, input type: The module supports a variety of types of digital input signals, such as switch signals, sensor signals or other digital logic signals. They can handle discrete high/low level signals.
3, high-speed input: the module usually has high-speed input capability, which can receive and process rapidly changing digital signals in real time. This is useful for applications that require high-speed data acquisition and response.