How should the daily maintenance of the van filter press be done
Filter press also need daily maintenance?
That’s for sure, although we use the comparison every day and don’t see a big difference. Usually not much show, but with the growth of time can slowly accumulate fault problems, serious will greatly shorten the service life of the filter press,
So how should the daily maintenance of the van filter press be done?
In order to ensure the normal operation of the van filter press and extend its service life, regular inspection and maintenance must be carried out.
1, in the installation of the filter press, the manufacturer’s technicians will guide the assembly on the site, and leave after the equipment can operate normally, at this time, workers can be familiar with the structure and working principle of the machine, so that the parameters of the pen operation are controlled within the specified range.
2. Make operation records, record the operation of the equipment and the problems that occur, maintain the fault in time, and cannot run with illness.
3, the work should be completed in time to remove all parts of the equipment residue, so that the filter press to keep clean.
4, pull plate trolley and filter plate and running track and other relative moving parts, to keep good clean and lubrication.
5, often check the sealing surface of the filter plate to ensure that it is clean. Check whether the filter cloth is folded, whether the filter cloth hole and the filter plate hole are aligned and smooth, only the filter plate seal is reliable, the filter press can work normally.
6, pay special attention to the cleanliness of the hydraulic system oil and replace the hydraulic oil regularly, and often check the sealing performance of the hydraulic component interface and pipeline.
7, in the corrosive quality and humid environment of the filter press to pay attention to the corrosion of electronic components, moisture-proof, often to carry out insulation and operation reliability check, the operation of inflexibility or poor accuracy of the components once found to replace and repair immediately.
8. If the van filter press equipment is not used for a long time, the filter plate should be cleaned, stacked flat, to prevent deformation, and the filter cloth is cleaned and dried. Piston rod and other parts are coated with oil to prevent rust.