IS200EGPAG1B Technical specifications
Plate type lGate Pulse Amplifier plate
Configurable hardware l 5 Onboard jumper
Discontinued/Obsolete/Old l Yes, please contact AX Control for available surplus
Function Interface control of the Power Bridge
Functional acronym l (abbreviation) EGPA
Model IS200EGPAG1B
Notable components onboard green and red LED indicators
OEM/Manufacturer General Electric, GE Industrial Systems
Repairable Y/N repairable
Series/Product Line EX2100 Excitation Controller – Exciter system
It weighs 1 pound, 9 ounces
About IS200EGPAG1B
The gate pulse amplifier board number IS200EGPAG1B is located in the power conversion cabinet and can be connected to the power conversion module. This module is one of the boards labeled under the bridge and protection board/module, and although the board can operate independently, it usually requires power from one of the EPDM modules.
The IS200EGPAG1B board receives feedback from two thermal switches mounted on the SCR radiator. These switches trigger and open at the alarm and trip levels and are directly connected to IS200EGPAG1B. The temperature that the switch must reach before triggering is the trip level of 190°F and the alarm level of 170°F. If only one switch is turned on, the switch can be turned on individually or together, then an overtemperature alarm about the bridge occurs, if both switches are turned on, it indicates that tripping and failure have occurred.
The IS200EGPAG1B board has five jumpers that allow the user to select the desired application-specific configuration and easily adjust the jumper configuration before installation.
FAQ about IS200EGPAG1B
What does AX Control offer in relation to the IS200EGPAG1B gate pulse amplifier board?
AX Control will buy, sell, or repair IS200EGPAG1B boards, and there is usually excess stock on the shelf for quotation. The IS200EGPAG1B Gate Pulse Amplifier Board is sold and repaired with a 3-year warranty. Please contact our sales team by phone or email for a quick quote.
Are the LED indicators on IS200EGPAG1A and IS200EGPAG1B the same?
Yes, we do! The leds on the IS200EGPAG1B board are also used to indicate the current status entering the bridge, line filters, gate power supplies, output triggers, bridge temperature, alarm/fault conditions, and cooling fan rotation.
In the EX2100 series, there are many different types of printed circuit boards. Which category does the IS200EGPAG1B model belong to?