MVME3100 How to check the fault of linear module?
MVME3100 Linear module can be described as an indispensable part of automation equipment, in the process of automation equipment operation, if the linear module alarm failure, often lead to the automatic production line stop, resulting in a reduction in output, so check the linear module fault is very important!
1. Check whether the appearance has obvious wear, deformation or cracks. At the same time, check whether the installation base is smooth, clean, and free of oil and impurities.
2, check whether the coupling is loose or damaged, and whether the drive is working normally. If any exception is found, replace or repair it in time.
3, MVME3100 check the slider, screw and other moving parts are working properly. If it is found that there is stuck, loose or abnormal noise, it needs to be cleaned, lubricated or replaced.
4. Check whether the power supply is normal and the control system is stable. If the power supply or control system fails, it may cause the linear module to not work properly. You need to check whether the power cables and control system cables are intact, and whether the parameters of the control system are correct.
5. MVME3100 Check whether the load borne by the linear module is within the allowable range, and whether the operating parameters such as speed and acceleration are reasonable. If the load is too large or the operating parameters are not set properly, the linear module may fail. The system needs to be adjusted or repaired based on the actual situation.