330104-00-05-10-02-CN | 3500/05-01-02-00-00-00 | Approach the probe

Model: 330103-00-10-10-02-cn

Product Type :3300 XL 8mm proximity probe

Made in the USA

Certificate of Origin (COO) can be added

Non-thread length option :00 = 0 mm

Overall box length option :10 = 100mm

Total length options :10 = 1.0 m (3.3 ft)

Connector and cable type options :02 = Miniature coaxial ClickLocTM connector, standard cable

Agency Approval options :CN = country-specific approval (Quick reference guide and on-site notification letter for CN Approval options in Download section)

Tip material: polyphenylene sulfide (PPS).

Probe housing material :AISI 303 or 304 stainless steel (SST).

Probe pressure: The 3300 XL 8mm probe is designed to seal the pressure difference between the probe tip and the housing. The probe sealing material consists of Viton® O-rings. Probes are not pressure tested prior to shipment. If you need to test pressure seals for your application, please contact our custom design department.

Weight :0.323 Kg

Shipping weight: 1.5Kg

The working principle of the sensor can be summarized as follows: convert the input physical or chemical quantity into an electrical signal output.

Specifically, the sensor is usually composed of a sensing element, a conversion element and a conversion circuit. The sensor is responsible for sensing the change being measured and converting it into a physical quantity that can be easily measured, such as a strain gauge in a pressure sensor. The conversion element converts the physical quantity of the output of the sensor into an electrical signal, such as the resistance change of the output of a strain gauge. The conversion circuit amplifies and adjusts the electrical signal output of the conversion element to adapt to the subsequent signal processing and transmission requirements.