Manufacturer : Bently Nevada
Product No. : 3500/22M 288055-01 New calorie
Product type : Standard Transient Data Interface Module with USB cable
Made in U.S.A
Shipping weight : 5 Kg

The 3500/22M Transient Data Interface (TDI) is the interface
between the 3500 monitoring system and compatible
software (System 1 Condition Monitoring and Diagnostic
software and 3500 System Configuration software). The TDI
combines the function of a 3500/20 Rack Interface Module
(RIM) with the data collection capability of a communication
processor such as TDXnet.
The TDI resides in the slot adjacent to the power supplies of a
3500 rack. It interfaces with M series monitors (3500/40M,
3500/42M, etc.) to continuously collect steady state and
transient dynamic (waveform) data and pass this data
through an Ethernet link to the host software. Refer to the
Compatibility section at the end of this document for more
information.

I/O Module Signal Common Terminal
Both versions of the TDI I/O Module now include
a 2-pin connector for connecting Signal
Common to a single point Instrument Ground
for the rack. When this is done, the selector
switch on the side of the Power Input Module
(PIM) must be slid in the direction of the arrow
marked “HP” to isolate Signal Common from
chassis (safety) ground.