You are here:

3500/72M140734-08 | (4) Channel monitor | adjust the signal for a variety of dynamic and static position measurements

Model :3500/72M140734-08
Features:
(4) Channel monitor
Conditional signals for a variety of dynamic and static position measurements
Piston rod position, piston drop and supercompressor measurement function
Provide mechanical protection

Categories:
Email:jllucky33@qq.com
phone:(86)17372046300

Product content

3500/72M140734-08 | (4) Channel monitor | adjust the signal for a variety of dynamic and static position measurements

Model :3500/72M140734-08
Features:
(4) Channel monitor
Conditional signals for a variety of dynamic and static position measurements
Piston rod position, piston drop and supercompressor measurement function
Provide mechanical protection
The GE/ Bentley Nevada 350072M 140734+08 series pole position monitor is a 4-channel monitor that receives input from proximity sensors, adjusts the signal for a variety of dynamic and static position measurements, and adjusts the signal for use with user-programmable alarms
Compare. The 3500 rack configuration software can be programmed for each channel of the 3500/72M to perform any of the following functions: rod position measurement, rod drop measurement, supercompressor measurement.

 

The main purpose of the 3500/72M 140734-08 monitor is to provide mechanical protection for reciprocating compressors by continuously comparing monitoring parameters with configured alarm tube set points to drive alarms. The monitor also provides basic reciprocating compression for operations and maintenance personnel
Machine information.

3500/72M 140734-08 Power Supply AC or DC input power can be ordered
Compatible with global power and voltage sources. Line noise filters are standard. The 3500 rack can be supplied with a single power supply or
The use of dual power supply cannot tolerate the situation of power interruption
Provide redundancy. Dual power supplies are located in the upper and lower parts of the leftmost rack slot, and redundant power supplies can use separate voltage sources. For example, the main (lower) power supply can be supplied using a 120 Vac power supply
Power, while the backup (top) power supply can be powered by an uninterrupted 24 Vdc power supply.
Each power supply can individually power the entire rack and its modules. When a redundant power supply is used, the lower power supply acts as the main power supply for the rack, while the upper power supply acts as a backup power supply, ready to fail when the main power supply occurs
The block automatically acts as the host frame immediately
Power runs without interrupting rack function. The 3500/15 power supply module has a self-monitoring function to determine whether all its output voltages are within the specification range. The module passes the green on the front panel of the power supply
The color power supply is normal and the LED sends a notification.

1.3500/72 m front view
2. State LED
3. Buffer sensor output
4. Rear view of the I/0 module
5. Barrier 1/0 module, internal termination
Module 6.1/0, internal termination
Module 7.1/0, external terminal

You may also like

Reviews (no reviews yet)

Reviews

There are no reviews yet.

Be the first to review “3500/72M140734-08 | (4) Channel monitor | adjust the signal for a variety of dynamic and static position measurements”

Your email address will not be published. Required fields are marked *

Post comment