3500/93 | 3500/32-01-00  System display

Description

The 3500/93 system display is designed to meet the requirements of the American Petroleum Institute (APl) Standard 670 and provide local or remote vision

Instructions for all 3,500 machine protection system information, including:

System event list

Alarm event list

All channel, monitor, relay module, critical phasor module or TachometerModule data

The 3500/93 system display is configured using 3500 rack configuration software. The display can be installed in four ways:

1. Face Mount – Display mount directly on any complete front panel

The size 3500 frame uses a special hinge support. This allows access to the rack’s buffer output connector and user interface buttons and buttons

The switch is constantly on or off display.

Note: Only in this installation mode, DIM must be installed in slot 15 on the far right of the cabinet. face

Installation options are not compatible with the 3500 Mini rack.

2. 19-inch EIA rack Mount – display mounted on 19-inch ElA rail and

Located 100 feet away from System 3500. (Up to 4,000 feet

Stay away from the 3500 system when using external power).

3. Panel Mount – Display mounts in panel openings located

Same cabinet or 100 feet away from the 3500 system. (Up to 4,000 feet from 3500 systems when using external power). Independent mounting – Display against wall or wall mounting

Panel, located 100 feet away from the 3500 system. (Up to 4000 feet from 3500 system when using external power)