Model: 531X305NTBAJG1
Brand: GE
Category: Terminal board

The 531X305NTBAJG1 is an NTB/3TB terminal board manufactured by General Electric for DC300 and Mark V applications. The 531X305NTBAJG1 is a “J” type version that will serve as a suitable replacement for any NTBA terminal board that uses backward compatibility.
What is the instruction manual for 531X305NTBAJG1?

The GE instruction manual for 531X305NTBAJG1 NTB/3TB terminal board is GEI-100020B, which can be provided according to AX Control requirements.
531X305NTBAJG1 Interface And What interface?

531X305NTBAJG1 The NTB/3TB terminal board provides the following ports:
· Power Supply
· Encoder
·RS-232C and RS422
· Relay output
· Simulated speed and reference coarse adjustment
· Low-level analog I/O
· Digital control input
About 531X305NTBAJG1
The GE 531X305NTBAJG1 card was developed for use as an NTB/3TB terminal board. The card is manufactured using the 531X series replacement driver and driver board. When installed, this board will provide a number of key device functions. Some of the interface features of the card include relays and serial outputs, power supply, encoder, and analog I/O.

The NTB/3TB terminal board provides many important functions for the host drive. When installed, the 531X305NTBAJG1 card can produce regulated output power rated at 5 VDC and 15 VDC. The board also produces 24 VDC and 120 VAC unregulated power supplies. The jumper on the card also allows for interface configuration of the 5 V and 15 V encoders. There are 7 relays in the board, which are of type C or Type A output type. The contact fate of each relay is 120 VAC. There are also four potentiometers on the board. These allow low-level analog I/O scaling.