PFCL201C 20KN Load cell – Vertical force measurement
These devices are designed for strip tension measurement in applications where it is necessary or advantageous to determine vertical force components.
They are machined from a single piece of stainless steel and, in addition to high immunity to dust and corrosion, have extremely high resistance to overload, shock and impact.

The standard structure is made of highly resistant stainless steel and internal components are pot-sealed. The rolling machine can be used in extremely harsh environments such as galvanizing or pickling lines.

. 
The first Pressductor sensor was developed in Vasteras, Sweden in the early 1950s and patented in 1954.

ABB’s famous Pressductor® technology is a measurement principle based on the magnetoelastic effect – the magnetic properties of a material are affected by the mechanical forces applied to it.

PFCL201C 20KN When subjected to mechanical forces, ABB’s Pressductor sensors generate a measurement signal due to changes in the magnetic field. Move your mouse over the illustration to see these changes. Since these signals do not depend on physical motion or deformation, load sensors combine sensitivity with extraordinary overload tolerance and have almost no built-in limit on the number of load cycles.

ABB Pressductor sensors produce high-power, low-impedance AC signals that are highly resistant to electrical interference and ground faults.

The ABB PFCL201C 20KN Pressductor sensor represents unrivalled load cell performance, thanks to its unique combination of precision, overload capability and ability to withstand harsh environments. By using this technology, you will achieve higher quality and reliability, especially under demanding conditions.

property
Nominal load
(Rated capacity) : thousand 5.0 10.0 20.0 50.0
Pound. 1125 2250 4500 11250
Extended load: thousand 7.5 15.0 30.0 75.0
Pound. 1688 3375 6750 16875
Allowable load
Horizontal: thousand 2.5 5.0 10.0 25.0
(horizontal) H=300 mm pounds. 563 1125 2250 5625
Overload capacity
Measurement direction
(Vertical:) thousand 50.0 100.0 200.0 500.0
Pound. 11250 22500 45000 112500
Landscape orientation
(Horizontal) H=300 mm: 1000 12.5 25.0 50.0 125.0
Pound. 2815 5625 11250 28125
Deflection mm 0.02 0.02 0.02 0.02
1/1000 inch; 0.8, 0.8, 0.8, 0.8
Spring constant kN/mm: 250 500 1000 2500
1000 pounds per inch: 1430 2860 5720 14300