DS200DCFBG1BLC technical specifications
Manufacturer: General Electric
Series: Mark V
Part number: DS200DCFBG1BLC
Function Description: DC feedback power board
Description: Model: GEI-100028
Functional Acronym: DCFB Corporation
PCB coating: Ordinary coating

Technical parameter
Input power: 38 to 115VAC (24VDC).
Test points: including P5 +5V DC power supply test point, DCOM 0V test signal common reference point, P15 +15V DC power supply test point, N15-15V DC power supply test point, ACCT DCFB to SDCC ACCT signal test point.
Connectors: Transmission of input and output signals/power via 18 plug connectors and 9 pin connectors.

About DS200DCFBG1BLC
The DS200DCFBG1BLC is a power board designed by General Electric for the Mark V Series optional and replacement boards. Members of this family are cross-compatible with many GE branded exciters and drives. The drives of DC2000, AC2000, CB2000, ME2000, and FC2000 can accept this power strip. This card provides system control level power to the driver it is mounted on and provides power to the case fan. The board’s source AC input is rated from 38 to 115 VAC.

Functional characteristics
Power Supply: The DS200DCFBG1BLC provides system control level power to the mounted drives, as well as power to the case fan, with source AC input rated from 38 to 115VAC and frequency range from 0 to 500kHz.
Circuit system: including AC and DC monitoring circuit, control level power supply circuit, motor excitation power supply circuit and drive circuit, can fully monitor and ensure the stable operation of power supply and related circuits.
Configuration mode: With twelve jumpers and seven dip switches, users can flexibly configure them based on actual external requirements.
Status indicator: DS200DCFBG1BLC built-in two leds and a neon indicator, to provide users with important diagnostic and status information, easy to understand the power board working status.
Safety protection: Three fuses on the board are protected to prevent interruptions or surges from interfering with the current, while five test points are integrated to allow users to regularly monitor voltage levels.