Product Number: DS200DCFBG1BNC

Product Code SKU: DS200DCFBG1BNCGBTC

Manufacturer: GE Boards & Turbine Control

Series: Mark V DS200

Input voltage: 24V DC

Operating temperature: 0℃ to 60℃

Memory capacity: 32 MB RAM, 64 MB Flash ROM

Communication interface: Ethernet, RS-232, RS-485

Supported programming languages: C, C++, LD, ST, IL, FBD, SFC, IL

Supported operating systems: Windows, Linux, VxWorks

Output points: up to 4096 digital output points and 2048 analog output points

High-speed computing capability: GE DS200DCFBG1BNC uses high-performance central processor and advanced digital signal processing technology, which can quickly process various control tasks.

The DS200DCFBG1BNC is an alternative and optional power board for the General Electric Mark V series.

The DS200DCFBG1BNC board is a power board in the Speedtronic Mark V series that provides control-level power to drivers and chassis fans. It is a large rectangular circuit board with a large number of components mounted on the surface, including power modules, control modules and interface modules. The power supply board also has overcurrent protection, overvoltage protection, undervoltage protection and other protection functions to ensure the safe and stable operation of the system.

The DS200DCFBG1BNC is a power supply board manufactured for General Electric’s Mark V Series replacement boards and optional boards. The DS200DCFBG1BNC circuit board is part of the Speedtronic Mark V control system. The card supplies power to the system control power supply and the fan of the cabinet. The card is compatible with many GE branded exciters and drives and can be installed in a variety of systems. Drives in the FC2000, AC2000, DC2000, ME2000, and CB2000 series can use this board. The voltage fed into the board can be rated safely in the range of 38 to 115 VAC.

There are five circuits around the DS200DCFBG1BNC circuit board. These circuits include drive circuits, control level power supply circuits, motor excitation power supply circuits, and AC and DC monitoring circuits. To ensure that the circuit is not interrupted, the three fuses on the ship are protected. If any fuses need attention, integrated LED and neon indicators will alert the user. Monitoring voltage levels is important and can be done using one of the five test points on the card. The user can configure with 12 jumpers and 7 DIP switches.

The installation parameters included with the circuit board and driver should be met. Following these will ensure that the DS200DCFBG1BNC and the drive will operate as expected.