Ge’s DS200RTBAG1ABB printed circuit board is part of the company’s Mark V series. MKV is a Speedtronic turbine control system for managing and protecting industrial turbine systems (gas and steam).

The DS200RTBAG1ABB is an optional board that can be installed in GE exciter and drive cabinets. It provides an additional 10 relays for the driver or exciter. DS200RTBAG1ABB is a 110 VDC board. If you need a 24 VDC board, check out the RTBAG2 board in our stock. If you need 115 VAC, please refer to the RTBAG3 board in our stock.

DS200RTBAG1ABB has ten relays on its surface. Each relay has an LED indicator paired with it that will be displayed when the relay is powered on. The relay I/O is protected by 130 VAC MOV (metal oxide varistor). They are located on the side of each relay.

A Printed Circuit Board (PCB) is a circuit board for electronic devices that forms a circuit pattern on an insulating material through printing technology.

The manufacturing process of a PCB usually includes the following steps:

1. Design: Use circuit design software to design the circuit layout of the circuit board.

2. Plate making: The designed circuit layout is converted into light engraving plate for printing circuit patterns.

3. Printing: The circuit pattern is printed on the insulation material using printing technology.

4. Etching: Use etching technology to etch away the unwanted copper foil, leaving the required circuit pattern.

5. Drilling: Drill out the required holes on the circuit board for connecting components and wiring.

6. Plug-in: Insert electronic components into holes in the circuit board.

7. Welding: Use welding technology to connect the components to the circuit board.

8. Test: Test the circuit board to ensure that it works properly.

DS200QTBAG1ABB PCB is widely used in a variety of electronic equipment, such as computers, mobile phones, televisions, game consoles and so on. It can realize the connection and wiring between electronic components and improve the reliability and stability of electronic devices.

In short, the DS200QTBAG1ABB printed circuit board is a circuit board for electronic devices, which forms circuit patterns on insulating materials through printing technology. Its manufacturing process includes steps such as design, plate making, printing, etching, drilling, plug-in, welding and testing. PCB is widely used in a variety of electronic equipment, improve the reliability and stability of electronic equipment.