【 Function Description 】

DS200TCEAG1BNE Technical specifications

Manufacturer General Electric (GE)

Series mark V

Emergency overdrive plate

Instruction manual geh-6153

Board position protection core <P1>

Features Signal scaling, protection

Product description

The DS200TCEAG1BNE is an emergency overdrive plate produced by General Electric for the Mark V series. Also known as the protection processor, the board primarily protects the Mark V by making efficient use of high-speed protection circuitry. The emergency overspeed plate can also introduce automatic synchronization, flame detection, low and high shaft speed signals. The above signals are scaled and adjusted, and then written to the STCA board via IONET. TCEA board can also send emergency trip signal to TCTG(turbine trip board); If enough relays “vote” to trip, the TCTG board can handle this process.

When referring to the GEH-6153 user manual, the hardware configuration is simple. Jumpers J31 and J1 located on the TCEA board are used for testing purposes. TCEA’s jumper J4-J6 establishes the IONET address for the board. Jumper J2-J3 provides IONET terminal resistance. The J12-J21 jumper helps assign overspeed trip frequency Settings, especially for high pressure shafts. At the same time, J8-J11 and J22-J27 jumpers provide the same function for low pressure shafts. Both the Hardware Jumper screen and Appendix A contain more information about hardware jumper Settings. The user manual also details the various other jumpers located on the board.

Frequently asked questions about DS200TCEAG1BNE

What is DS200TCEAG1BNE? What is DS200TCEAG1BNE responsible for?

Ge Multilin’s DS200TCEAG1BNE is an emergency overdrive board (also known as a protection processor) for high-speed protection circuits. The DS200TCEAG1BNE handles overspeed and flame detection trip signals. The DS200TCEAG1BNE works with independent protection modules <P>.

What kind of microprocessor does the DS200TCEAG1BNE have?

The DS200TCEAG1BNE has an 80196 microprocessor.

How do DS200TCEAG1BNE Connect to modules?

The DS200TCEAG1BNE is connected to the < P > core via a series of berg jumpers that program the DS200TCEAG1BNE to where it is located.