Model: FPS400-24
Category: 24V DC power module
The quality of gold or silver; New, not new
Stock: available
Brand: FOXBORO
1. Power input :FPS400-24 is usually a 24V DC power module, which is used to provide stable power for the control system

The source.

2. Output voltage: Usually provides 24V DC voltage power output.

3. Power capacity: The specific power capacity (usually in watts or amps) may vary from model to model, depending on the response

The need to use.

4. Reliability :FOXBORO products are generally known for their high reliability and stability and are used in industrial automation and process control

Apply.

5. Built-in protection: The power module usually has overvoltage, overcurrent, short circuit and other protection functions to ensure the safe operation of the system

Fine.

6. Scope of application: The FPS400-24 power module is usually suitable for the power supply of FOXBORO control system, such as DCS

(Distributed control system), PLC(Programmable logic controller), etc.

7. Industrial standards: These power modules usually comply with industrial standards and certifications to ensure stability and stability in industrial environments

Reliability.

8. Hot swap: Some models may support hot swap, allowing the power module to be replaced without interrupting system operation

Block.

9.LED indicator: Usually have LED indicator, used to display power status and fault information.

I0. Modular design: Some models may have a modular design that allows for expansion of power capacity or replacement of failing modules as needed.

FPS400-24 DC power module consists of high frequency switching power module, control unit, measurement module integrated in silicon chain, switching module, insulation detection module, battery test module and multiple AC input, DC voltage display, current display and so on.

The FPS400-24 DC power module is a self-contained module that converts alternating current to direct current and is usually rated according to its current size. Modules can be used in parallel with multiple units to achieve N1 redundancy. The module output is a stable, adjustable 110 V, 220 V DC voltage. The module itself has a variety of protection functions, such as input overvoltage protection, output overvoltage protection, output current limit protection and output short circuit protection.