HYDRAN M2 | HWA143-TDM-PMC-V20 | Two-axis motion control module

Model: HYDRAN M2
Product Type: Two-axis motion control module
Finish: New/not new
Warranty: One year
Availability: In stock

Control power supply: nominal 25 VA, maximum 35 VA
Insulation voltage: 300 volts
Communication protocol: Modbus RTU or DNP 3.0
Data record storage :2 to 16 events with 2048 to 256 data samples
Waveform capture sampling rate: 16 per cycle

Product description
The HYDRAN M2 module is a two-axis motion control module that is highly integrated with logic solutions and solutions
The communication function of the IC693 PLC provides two main control loop configurations: standard mode and Follower mode. The basic functions of the DSM302 are as follows
The digital signal processor (DSP) provides ge Funuc AC coservice with vector control coservice loop updates :250ussec(torque), 1msc(speed), 2 msec(position) block processing time at speeds below 5 milliseconds and the position error integrator
High tracking accuracy High resolution programming unit
8.388.608… +8,388.607 User units
Location:
Speed:
1.8.388,607 User units/second
Acceleration :1… 134.217.727 User unit/s/s
Ease of use
Simple yet powerful instruction set
The IC693DSM302-AE features single – or biaxial motion programs initiated by synchronous blocks
The program supports short motion programs (called program zeros) that can be created in MS-DOS
Programming software configuration function
Non-volatile (flash) memory for 10 programs and 40 subroutines
User Extended Programming unit (only in standard mode)
General-purpose programming that uses command parameters as operands for acceleration, speed, movement, and residence
Command to configure the MSDOS configuration software