Part number: IC200MDL750E

Series: VersaMax I/O

Number of input groups: 4 (4)

Product Description: Discrete input module

Number of channels: 32 (32)

Number of channels per group: 8 (8)

Points: 32 input

Number of groups: 4 (4)

Input signal, nominal: 24 volts DC

Input signal, range: 0-30 volts DC

The IC200MDL750E is a high density discrete input module for the GE VersaMax I/O platform. The module has thirty-two (32) input channels, supports positive and negative logic wiring configuration, is divided into four (4) groups, each group of eight (8) input channels. The module is rated for 250 VAC inter-group isolation, continuous and 1500 VAC continuous isolation with a duration of 1 minute. This type of module is commonly used in a variety of industrial applications, primarily for integrating input devices such as buttons, auxiliary contacts, limit switches, level switches, proximity sensors, and similar binary or on/off devices.

The input channel of the IC200MDL750E is designed to accept an input voltage signal range of 0-30 VDC, with a nominal input of 24 VDC. The module has on-state voltages of +15 to +30 VDC and off state voltages of 0 to +5 VDC, while on-state and off state current ratings are w.0 to 5.5 mA and 0 to 0.5 mA, respectively. For on-off and off-on channel state transitions, the response time is typically a maximum of 0.5 ms. In addition, the input channel provides configurable input filtering times that can be used to eliminate de-jitter, false positives, and false negative signals. Specifically, the available filter Settings are 0 ms, 1.0 ms, and 7.0 ms, with the default setting being 1.0 ms.

The main functions of the IC200MDL750E discrete input module include:

Detect the status of the input signal: The discrete input module can detect the status of the input signal from buttons, switches, sensors and other devices, such as on or off, high level or low level.

Conversion signal Type: The IC200MDL750E discrete input module converts the detected discrete signal into a digital signal for processing in a digital system.

Transmission of digital signals: The converted digital signal can be transmitted via discrete input modules to the control system or other modules for further processing or operation.