IC670CHS001E| IC670GBI002| I/O carrier module

Product model: IC670CHS001E
Product type: I/O carrier module
Finish: New/not new
Warranty: One year
Availability: In stock
Product Description :I/O carrier module
Carrier module terminal: barrier style
Terminal size: AWG #14 (2.1 mm2) to AWG #22 (0.35 mm2)
Terminal torque: 8 pounds an inch
Nooooo. Number of terminals: 37 terminals
Ground Size :AWG #14 (average 2.1mm2 cross section)

The IC670CHS001E has a total of 37 termination points. Each terminal can accommodate up to two (2) wires in a size range of #14 (2.1 mm2) to AWG #22 (0.35 mm2) wires. The applicable wire insulation class is 90 degrees Celsius, while the recommended tightening torque is 8 in-lb. For ground terminal wiring, the applicable wire size is AWG #14 (average cross section is 2.1mm2) and the length must not exceed 4 inches or 10.16 cm.

IC670CHS001E The terminal block supports horizontal DIN rail or panel mounting. With the IC670CHS001, hot insertion and removal can be achieved in non-hazardous application areas when the appropriate Bus interface Unit (BIU) is installed, especially BIU modules with firmware version 2.1 or higher. For connections with one or more terminal bases, IC670CBL001 compatible pre-assembled cables. In addition, the module can be connected to auxiliary terminals to provide additional grounding, signal backhaul, and signal common connections.