IC693MDR390 | 90-30 series | programmable logic controllers
Model: IC693MDR390
Category: 90-30 series programmable logic controllers
Finish: New, not new
Stock: Yes
Warranty: One year
Categories: GE
Tags: IC693MDR390
Email:jllucky33@qq.com
phone:(86)17372046300
Product content
Model: IC693MDR390
Category: 90-30 series programmable logic controllers
Finish: New, not new
Stock: Yes
Warranty: One year
【 Function Description 】
The IC693MDR390 is a series 90-30 Programmable logic controller (PLC) platform component module that functions as a combination of discrete input and output modules. The module has eight (8) discrete input channels designed to accept input signals with a voltage range of -30 to +30 VDC with a rated or nominal voltage of 24 VDC, compared to a typical input current of 7.5 mA with a rated voltage. It also features eight (8) discrete output channels designed in the form of normally open (N.O.) relay contacts for voltage ranges from 5 to 30 VDC, 5-250 VAC, and 50/60 Hz frequencies, with each output contact capable of delivering a maximum load current of 2 amps and a maximum current of 4 amps. The IC693MDR390 is a single-slot module that can be installed in any I/O slot on the Series 90-30 baseplate. It can be used with any central processing unit (CPU) module, such as embedded and modular cpus. It can be installed on a local I/O substrate, and the CPU can also be installed on a local I/O substrate, or on an expansion board or remote I/O substrate. The IC693MDR390 input channel has a on-voltage of 15 ~ 32vdc, on-current of 4ma, off voltage range of 0 ~ 5vdc, and off current of 1.5 mA. The typical response time of the input channel for on and off signal conversion is 7ms. In contrast, for two signal conversions, the typical response time of the output channel is 15 ms. The backplane current consumption of this module is 80 mA when all IO is working, and 70 mA when all outputs are powered.
The GE Fanuc IC693MDR390 I/O module is a solid state I/O module designed specifically for the GE Fanuc series 90-30 PLC product line. This I/O module has 8 DC inputs and 8 normally open relay output circuits. It is a simple to use 8-circuit trigger device that accepts discrete inputs from manual switches, buttons, limit switches and photocells. Each input corresponds to the relay output circuit and can be used to control user-defined loads such as motor starters, alarm indicators, and solenoid valves. GE Fanuc IC693MDR390 8 DC input 8 The relay output module must be powered by a rated 24v DC power supply and can work normally in the rated voltage range of -30 to + 32v DC.
The GE Fanuc IC693MDR390 8 DC input and 8 relay output modules provide a low-cost solution for controlling up to 8 separate relay circuits by using DC signals. The output operating voltage can operate in 2 ranges :5 to 30 volts DC or 5 to 250 volts AC 50 to 60 Hz. The module’s 8 relay outputs are divided into 2 groups of 4 outputs each, and each group can be powered from a different power supply using a different voltage range as required. The GE Fanuc IC693MDR390 8 DC input and 8 relay output modules have a high isolation voltage of 1500 volts RMS between the input and output, and a lower RMS value of 500 volts between the output groups. The response time for both ON and OFF is less than 15 milliseconds. Each circuit has a status LED that indicates when the relay is on (normal state) or off (powered state).
IC697MDL653 |
IC697MDL671 |
IC697MDL740 |
IC697MDL750 |
IC697MEM717C |
IC697PCM711P |
IC697PWR710F |
IC697PWR710H |
IC697PWR711 |
IC697PWR720 |
IC697PWR724 |
IC697PWR748 |
IC698ACC701 |
IC698CHS009 |
IC698CHS009A |
IC698CHS117C |
IC698CMX016 |
IC698CPE010 |
IC698CPE020 |
IC698CPE020-CC |
IC698CPE030 |
IC698CPE040 |
Reviews
There are no reviews yet.