Model: IS200EPSMG1AEC
Category: Excitation power supply
Quality: New, not new
Warranty: 365 days
Stock: available
Brand: GE

The main frequency is 1GHz
Memory 128MB DDR2
External storage 256MB NAND Flash
Interface Ethernet, RS232, RS485, CAN bus
Operating temperature -40℃ to +85℃
Humidity 5% to 95%RH, non-condensing
Dimensions 100mm x 60mm x 22mm

IS200EPSMG1AEC The model of the excitation power supply is IS200EPSMG1A. It is installed on the EPBP backplane and provides logical level power for other controllers. The power supply mode of the EPSM model is as follows: The EPDM outputs 125 VDC power. After receiving the power supply, the EPSM outputs 5vdc, 15vdc, or 24vdc. The power supply for the M1, M2, and C controllers is located in the power module under the control rack in the control cabinet.

Excitation power supply is a power supply device that provides excitation current for synchronous motor, and is generally used with synchronous motor.

The IS200EPSMG1AEC excitation power supply can provide current to the magnetic field of the synchronous motor to generate a magnetic field, so as to realize the conversion of electrical energy and mechanical energy. The performance of excitation power directly affects the operating efficiency, stability and reliability of synchronous motor.

There are many types of IS200EPSMG1AEC excitation power supplies, common DC excitation power supplies and AC excitation power supplies. Dc excitation power supply generally uses a thyristor rectifier device to convert alternating current into direct current to supply the excitation winding of synchronous motor. The AC excitation power supply generally uses a frequency conversion device to convert the alternating current into the alternating current with adjustable frequency and amplitude to supply the excitation winding of the synchronous motor.

In practical applications, the excitation power supply needs to be selected and configured according to the model, specification and operation requirements of the synchronous motor to ensure the normal operation of the synchronous motor.

Frequently Asked Questions about IS200EPSMG1A

The IS200EPSMG1A board is used for simplex control system. How many boards are needed?
Only one IS200EPSMG1A board is required, but this model can have both AC and DC power supplies for increased reliability.
How many EPSM models can be installed on the EPBP backplane?

Up to three EPSM models can be installed on the EPBP backplane to provide logical level power to the controller.

Where is the EPSM board installed in simplex excitation applications?

When the IS200EPSMG1A board is used for simplex exciter applications, the board will be installed in the same control module as the control card.