Product description

The IS200JPDHG1AAA model is marketed as a high density power distribution card and is commonly used in the Mark VI series. When the unit is operating, it can send 28 volts of direct current to up to three Ethernet switches as well as 24 Mark VIe I/O groups. If needed, you can buy more JPDH packages and then connect them together to provide more power to the I/O packages. Note that when connecting more JPDH cards together, they must be connected in a Daisy chain arrangement.

The physical components of the board are 29 female pin plug connectors. 29 of them are 6-pin connectors, and the remaining 27 connectors are 2-pin connectors; The 24 connectors are divided into three rows of eight connectors each. The connectors in these rows are labeled JT1 to JT8, JR1 to JR8, and JS1 to JS8. These lines are the feeds that provide the main power to individual I/O packets. The I/O packet circuit will include a temperature coefficient fuse device, which will be used to protect the branch circuit and provide a positive temperature fuse.

The IS200JPDHG1AAA board can be used in many hazardous places. The main locations where this board can be used are ATEX Zone 2 IIC Group, Class I Zone 2 A to D Group, and Class I Zone 2 IIC Group. The board can also be used in non-hazardous places, ULE207685 certification code for use in non-hazardous places.

JPDH models are ideal for Daisy chain connections to provide more power to the Mark VIe I/O battery pack, but it is important to note that branch circuit protection must be used when connecting multiple JPDH models together. – AX control Technician