Model: IS200TRLYH1BHH
Delivery time: In stock
Weight: 0.9 kg
Aspect: 7 cm x13 cm x13.5 cm
Description: Terminal relay board
Brand: GE

Function description:

IS200TRLYH1BHH is an analog output package under Mark VIe. GE developed the board under the Speedtronic Mark brand. Steam, natural gas and wind turbines, power plant balancing (BoP), deep sea drilling, desalination, gas compression and other facility wide asset management systems use Mark VIeS and Mark VIES control systems. To meet the application requirements of industrial control solutions, Mark VIe and Mark VIeS controllers can operate at a variety of frame rates. The control system is customized based on a number of parameters, including the complexity of the controller’s application logic, the type of processor, and the number of I/O and other interfaces employed.

Physical description of IS200TRLYH1BHH:

IS200TRLYH1BHH
The left edge contains two (2) large black terminals. Each terminal has twenty-four (24) silver metal terminals. There are forty-eight (48) terminals in total. Each terminal block is labeled with white lettering. Four (4) connector ports have been placed on the right bezel of the IS200TRLYH1B. Three (3) connector ports are aligned vertically at the edges, with the last one parallel to the connector port at the bottom. Near the center of the IS200TRLYH1B, there is a long row of white and black relays with cube-shaped transparent LIDS. These components have been connected to the PCB by black wire. Each relay has a round black transistor on either side. Paired with each transistor is a round red MOV or metal oxide varistor. Five (5) of these relays are arranged vertically on the top half of the IS200TRLYH1B. Five (5) additional relays have been aligned on the bottom half of the PCB.