Model: IS200VRTDH1D
Category: Single slot panel
Finish: new, not new
Stock: Yes
Brand: GE
Input signal: passive dry contact or wet contact.
Working voltage: 100-240VAC/DC.
Working current: ≤10mA.
Operating temperature: -25℃~70℃.
Storage temperature: -40℃~85℃.
Relative humidity: ≤95% (no condensation).
Dimensions: 48mm×96mm×16mm.
Installation method: guide rail installation.

【 Function Description 】

The IS200VRTDH1D is a GE Mark VI board component. The Mark VI is part of the Speedtronic family of gas and steam turbine management developed and released by GE from the late 1960s through the early 2000s. This turbine management line started with the Mark 1 and gradually became more advanced technology. The Mark VI includes a triple redundant central control module connected to a PC-based operating interface. This operating interface allows turbine data to be accessed from a single location using software designed for turbine control.

The IS200VRTDH1D is an RTD(Resistance temperature device) input. The board accepts 16 three-wire RTD inputs, although these are not directly connected to the board. Instead, the input wire is connected to the RTD terminal board and connected via cable to the VME rack where the IS200VRTDH1D is installed.

The IS200VRTDH1D has a single slot panel. Three LED indicators are installed on the panel to indicate operation/failure/status. Leds come in green, red and orange colors. The panel is attached to the main PCB with three screws.

The IS200VRTDH1D is component-intensive. Circuit board capacitors (more than 200) and resistors (hundreds) and more than 200 integrated circuits. This includes field programmable gate arrays (FPgas). The sensor beads on the circuit board are located on several lines. It drills holes in several locations, including around a specific mounted chip. The board is marked with 94V-0, 6BA01, and PC-40802 codes. GE’s publication GEH-6421 will provide more information on the board’s components and installation.

effect
The GE IS200VRTDH1D printed circuit board plays a key role in GE aero engine control systems. It is responsible for performing a variety of critical functions to ensure the safe and reliable operation of the engine.

use
The GE IS200VRTDH1D printed circuit board is used in a wide variety of GE aero engines, both civil and military. They are used in a variety of aircraft, including commercial aircraft, military aircraft and helicopters