MTL5053 | 8939-HN | Fieldbus network |

Product model: MTL5053
Product Category: Fieldbus network
Finish: New/not new
Delivery time: from stock
Guarantee: One year
Express: SF Express/Debon

The MTL5053 was developed specifically for expansion
31.25 The kbit/s (H1) fieldbus network enters the dangerous zone. lt provides power and communication equipment powered by signal
A conductor. A small internal terminator can be enabled via a switch at the top for devices with bus lengths in the safety zone
Modules. The MTL5053 conforms to the requirements of the Fieldbus Basic “specifies the power supply model 133t (lS power supply).

Location of the fieldbus device
Zone 0,1lC,T4-6 Hazardous zone, if certified accordingly
Dangerous area fieldbus power supply
18.4v + 2%
1052 +3% DC impedance
80mA Maximum current
Maximum cable length
Determined according to ls requirements, depending on other devices
The maximum acceptable voltage drop on the cable
Digital signal transmission
Compatible with 31.25kbit/s fieldbus system and meet the requirements
Has a fieldbus standard
Power supply voltage: 20 ~ 35Vdc
Instruction of the leader
Green: indicates the power supply
Power requirements, v, 80mA output load
135mA is typical at 24V
105mA, 35V
Power consumption in the unit, output load 80mA
Typical power at 24V is 2.3W
The maximum output power is 2.6W at 35V
Note: Adequate heat dissipation is allowed in all possible thermal environments
If yes, you are advised to install the MTL5053 in
Rail mounted in a vertical! Surface “with 10mm
The space between adjacent units. MIL MS010 10mm DlN-ail module
For this purpose, we can buy spscer.
The fan M7L5053 is mounted in a non-optimal orientation
The maximum operating temperature is reduced to 45℃.
There is 250V AC between the safe and dangerous area circuits and the power supply
Security description
22 v, 1022216 mA; Um=250V rms or DC18 Kω