NRD108028-8RDB43655-SA43655 | Compression controller

Model: NRD108028-8RDB43655-SA43655
Category: Compression controller
Finish: New/not new
Delivery time: from stock
Warranty: Warranty

The NRD108028-8RDB43655-SA43655 compression controller is a device used to automatically control the operation of the compressor. It can automatically load and unload the compressor to maintain the pipe network pressure within the limits that can be set. The controller controls the operation of the compressor according to set parameters such as unloading and loading pressure, minimum downtime and maximum number of motor starts.

The NRD108028-8RDB43655-SA43655 compression controller has the following functions:

Automatic control of compressor operation: NRD108028-8RDB43655-SA43655 controller can automatically control the operation of the compressor according to the set parameters. When the pipe network pressure drops, the controller automatically restarts the compressor to maintain pressure stability.

Compressor operation protection: The compressor is equipped with sensors, if the measurement value of one of the sensors exceeds the set stop standard, the compressor will stop running and the stop alarm signal will be displayed on the controller.

Maintenance alarm: Group several maintenance operations and set a time interval for each group. If the set time interval is exceeded, the controller will display a maintenance alarm message to remind the operator to perform the appropriate maintenance operation.

Automatic restart after power failure: The NRD108028-8RDB43655-SA43655 controller has the function of automatically restarting the compressor when the voltage is restored after power failure. This feature can be activated or disabled according to customer requirements.

The NRD108028-8RDB43655-SA43655 compression controller is an intelligent device that can improve the operating efficiency of the compressor and ensure the stability and safety of the system.

NRD108028-8RDB43655-SA43655 Automatic control compressor operation function is mainly reflected in the following aspects:

Pressure control: The controller monitors the pressure of the pipe network through the pressure sensor. When the pressure exceeds or falls below the set range, the controller will automatically load or unload the compressor to maintain the pressure stability.

Temperature control: The controller will also monitor the temperature of the compressor, when the temperature exceeds the set range, the controller will automatically adjust the operating state of the compressor to ensure that the temperature is kept within the safe range.

Running time control: According to the preset running time, the controller will automatically shut down the compressor after reaching a certain running time to avoid excessive wear and failure.

Automatic loading and unloading: When the compressor load needs to be increased or reduced, the controller automatically adjusts the operating state of the compressor to achieve automatic loading and unloading.

Fault diagnosis and prevention: The NRD108028-8RDB43655-SA43655 controller can also monitor the operating status and parameters of the compressor, when abnormal conditions are found, it will automatically stop and send an alarm message, and provide fault diagnosis and prevention functions to extend the service life of the compressor.

In the above way, the NRD108028-8RDB43655-SA43655 compression controller can automatically control the operation of the compressor, improve the operation efficiency, and ensure the stability and safety of the system.