Millmate Controller 400
PFVA401
The Millmate Controller 400 is designed to offer many features while being highly user friendly.
The MC 400 covers most mechanical configurations. This means that users only need to follow the step-by-step instructions to set up the controller and get the correct roll force measurement.

Predefined standard measurement modes
Built-in weighing sensor table
Filter time from 1 to 2000 ms
Easy to configure analog/digital input/output
Liquid level detector
Step detector
Unit selection (N, kN, MN, kp, t, lb, T)
Self-diagnostic test system, including sensor test
data

External connections:

Excitation current of the load sensor
2 or 4 analog inputs for weighing the sensor signal
4 analog outputs, voltage or current
8 digital inputs to control the signal
8 digital outputs
External unit + 24V power supply, Max. 0.5A
Ethernet connectivity for services and multiple control units
Two RS-232 serial interfaces for external display, control, etc.
1 RS-485 serial interface for external display
High Speed Profibus (optional)

property
Dimensions: (H x W x D) Two pieces 80 x 235 x 90 mm
Package Level 1 Gross Weight:
7.4kg
Protection Level Protection level 20
Power supply voltage: 85-264 volts
Power consumption: 650 volt-ampere
Operating temperature: 0 to +70°C
Storage temperature :-40 to +70°C
Analog output:
Voltage 0-10 volts
Current 0-20 MA
4-20 mA
Insulation group
Step response 1 ms (0-90%)
Digital input: 0/+24 V, insulation 4 + 4
Digital output 0/+24 V, insulation 4 + 4